Air Tools Pneumatic Tools Air Wet Grinder Polisher WG02
Pneumatic Wet Polisher can be used for any hard materials and any profile to sand the uneven surface, especially, ideal to sand the granite,marble, stone etc., construction
1) Suitable for grinding and polishing for stone, marble, granite etc.
2) Using for diamond grinding wheels, zero tolerance wheels, diamond edge profile wheels, finger bits and diamond hold saw
3) The air polisher installed between the air compressor and sander.
4) Due to assure the servicing life & operating smooth which must lubricated on the air inlet hole with #10 lubricating oil little about 4 hours each.
5) The sanding pad must assured lock on the sander.
6) In order to develop the high rate efficiency which employed at over heavy pressure is prohibited.
7) After sanding processing is over, which must lubricated on the air inlet hole with #10 lubricating oil little and rotated idly about 10 sec. Especially to clean the dirty.
4"(3")Air Wet Sander / Polisher (Water-Fed Type)
The Water-Feed installation favors your marble and stone finish work by water flow on the working
area and does no harm to your body due to non-dust atmosphere at operation
Auxiliary handle can be mounted onto either side of tool body
Features side mounted water control knob and air regulating knob
This low speed tool does the sanding and polishing work by fitting sanding disc wet 4? 3?in different grit from corse to fine
Great for laminating marble or stone table and trim work
AIR HOSE (ID)
|LENGTH x HEIGHT||
|5/8''-11 or M14 thread||
Place of Origin:Zhejiang, China (Mainland)
Brand Name: SLAIR
Rated Input Power:N/A
Disc(Wheel) Type:Grinding Disc
Free speed: 4500 rpm
Backing pad: 4''
Air Inlet: 1/4''
Avg.air consumption: 16cfm
Package:10pieces per box
Usage:Stone polishing and grinding